กลับไปหน้ารวมไฟล์
arduino-knight-rider-10-leds-d11e20-en.md

Set of LEDs that blinks one after another

EXPANDED TECHNICAL DETAILS

Advanced Shifting Sequences

Recreating the iconic "KITT" scanner from the Knight Rider series, this project teaches the logic of efficient LED array management.

  • Array-Based Animation: Instead of 10 separate variables, the LEDs are stored in a single integer array. The Arduino uses a "For-Loop" to iterate through the array, lighting up each LED in sequence to create a smooth "Bouncing" effect.
  • Tail Drag (Persistence of Vision): (Advanced version) The firmware uses PWM (analogWrite) to allow the LEDs at the back of the sequence to dim gradually rather than just turning off, creating a realistic "Motion Blur" tail.

Hardware Efficiency

  • Pin Management: Direct-controls 10 digital pins on an Arduino Uno or Mega. For higher LED counts, it provides a foundation for learning about 74HC595 shift registers to save pins.

ข้อมูล Frontmatter ดั้งเดิม 

title: "Arduino Knight Rider 10 LEDs"
description: "Set of LEDs that blinks one after another"
author: "MinukaThesathYapa"
category: ""
tags: []
views: 5849
likes: 4
price: 435
difficulty: "Easy"
components:
  - "10x Resistor 220 ohm"
  - "10x LED (generic)"
  - "21x Jumper wires (generic)"
  - "1x Breadboard (generic)"
  - "1x Arduino UNO"
tools: []
apps:
  - "1x Arduino IDE"
downloadableFiles: []
documentationLinks: []
passwordHash: "0d54ceec626abd39e1ec2c4ec9c9612c257236d4d01a612e12779ce2d18c0577"
encryptedPayload: "U2FsdGVkX19bjNu+w0+KFXvlqRUjzVj1DOeTsTuKrsUuieEA1sXjS3M3cf7D1VzZKUGr8x3X2SeE/rBcXxhPgo18qEG965JacOOiRFjgI9I="
seoDescription: "Build an Arduino Knight Rider 10 LEDs project. Create a sequence where LEDs blink one after another using Arduino code."
videoLinks: []
heroImage: "https://cdn.jsdelivr.net/gh/bigboxthailand/arduino-assets@main/images/projects/arduino-knight-rider-10-leds-d11e20_cover.jpg"
lang: "en"