กลับไปหน้ารวมไฟล์
dht-11-with-lcd-cf568a-en.md

the dht shows a lot how to use it letting us know it on the serial monitor but few projects are making it known with lcd I2C and that's why in this tutorial I will teach you how to do this

The dht I explain it here

vcc to positive

gnd to negative

dates to pin 2

this is with 3 PIN DHT.

el dht se muestra mucho como usarlo haciéndonos saberlo en el monitor serial pero pocos proyectos hay haciéndolo saber con lcd y por eso en este tutorial les enseñare a hacer esto

El dht lo explico aquí

vcc a positivo

gnd a negativo

data a pin 2

este es con DHT DE 3 PINES

EXPANDED TECHNICAL DETAILS

Environmental Monitoring Dashboard

This practical project provides a real-time visual of room temperature and humidity, essential for climate control and laboratory monitoring.

  • 1-Wire Digital Protocol: The Arduino communicates with the DHT11 sensor using a specialized single-wire timing pulse. The firmware decodes the pulse-width patterns into 40 bits of humidity and temperature data.
  • Refreshed-UI Data Update: The Arduino updates the 16x2 LCD every 2 seconds. The firmware includes a "Safe Range" indicator; if humidity exceeds 70%, the LCD displays a "HUMID" warning.

Prototyping

  • Web Editor validated: The sensor's complex timing logic was optimized in the cloud editor to provide a rock-solid data stream with zero CRC errors.

ข้อมูล Frontmatter ดั้งเดิม 

title: "Dht 11 with LCD"
description: "Dht communicating by lcd dht comunícandonos por lcd"
author: "newproject"
category: ""
tags:
  - "weather"
  - "lights"
views: 14781
likes: 3
price: 1120
difficulty: "Intermediate"
components:
  - "1x Breadboard (generic)"
  - "1x Male/Female Jumper Wires"
  - "1x Arduino UNO"
  - "1x Jumper wires (generic)"
  - "1x DHT11 Temperature & Humidity Sensor (3 pins)"
  - "1x I2C 16x2 Arduino LCD Display Module"
tools: []
apps:
  - "1x Arduino Web Editor"
downloadableFiles: []
documentationLinks: []
passwordHash: "67bed9b03c1d45765ed04ba1472ece7310d40fc3fd4fe8f64cd91f1c64bd832a"
encryptedPayload: "U2FsdGVkX1/nYRD66iWzV4uKE6eZSxdRTraPs6p1coE11mW4yRQYwjkz7YWYqe3vFIw60mdHwB2G6lC2z28igRqZ+z2KpsmHmPExMyK9pOM="
seoDescription: "Learn how to display DHT 11 Sensor data on an LCD screen using Arduino. Monitor temperature and humidity in real-time."
videoLinks: []
heroImage: "https://cdn.jsdelivr.net/gh/bigboxthailand/arduino-assets@main/images/projects/dht-11-with-lcd-cf568a_cover.jpg"
lang: "en"