กลับไปหน้ารวมไฟล์
lora-weather-station-with-arduino-56ada1-en.md

Today iam going to show you how to make LoRa (rfm95) Weather Station With Arduino & Sensors this is a simple project does not require high knowledge about arduino and electronics this is an intermediate level project, so its kind of okay to you. I tried my best to document this project to you, to look simple. so you can also make this project as I do, if you appreciate my work, a sub to my youtube channelwill make me happy and keeps me motivated so I can make new projects for you in the near future, so with out further ado lets get started........

EXPANDED TECHNICAL DETAILS

Long-Range Telemetry

This weather station is designed for massive transmission ranges (up to 10km) where WiFi and Bluetooth fail.

  • LoRa Modulation: Uses an RFM95 or SX1276 LoRa module. The Arduino packetizes data from a BME280 (Temp, Humidity, Pressure) and transmits it using chirp spread-spectrum technology, which is highly resistant to interference.
  • Point-to-Gateway: The station sends a small, low-power data burst every 15 minutes. This is received by a "Master" node that can upload the data to the internet or display it locally on an LCD.

Field Durability

  • Low-Power Firmware: To survive on solar/battery, the system uses the LowPower library to put the Arduino into a deep sleep, consuming only micro-amps between transmissions.

ข้อมูล Frontmatter ดั้งเดิม 

title: "Lora Weather Station With Arduino"
description: "Simple Weather Station With Lora, Arduino & Sensors"
author: "noneedforit"
category: ""
tags:
  - "environmental sensing"
  - "arduino projects"
  - "smart appliances"
  - "tracking"
  - "greener planet"
  - "diy projects"
  - "communication"
  - "weather station"
  - "monitoring"
  - "lora"
views: 4232
likes: 0
price: 2450
difficulty: "Intermediate"
components:
  - "1x DHT11 Temperature & Humidity Sensor (4 pins)"
  - "2x Arduino Nano R3"
  - "2x Breadboard (generic)"
  - "1x MyOctopus i2c Barometric Air Pressure Sensor BMP280"
  - "1x I2C 16x2 Arduino LCD Display Module"
  - "1x Soldering iron (generic)"
  - "1x PCB Holder, Soldering Iron"
  - "1x Solder Flux, Soldering"
  - "1x Solder Wire, Lead Free"
  - "2x LORA RFM95"
  - "1x Ldr Sensor"
  - "1x 5 mm LED: Red"
tools: []
apps:
  - "1x Arduino IDE"
downloadableFiles: []
documentationLinks: []
passwordHash: "67b4853dc9349bd49e20cdcb25155b00bf78cb888d2b9f22c3582c94e84f8c54"
encryptedPayload: "U2FsdGVkX18wFmnXyY1+lHPm/CNorVcU+H9t99U9uhey109/0C4mcCEEfzbx6qwWXyUw4QgK3ejJJtmgOZ7WcV0AfJwHzbXNWYsJxzwIvy4="
seoDescription: "Build a simple Lora Weather Station using Arduino and Sensors. A perfect IoT project for environmental monitoring."
videoLinks:
  - "https://www.youtube.com/embed/nDnEFc7_zFU"
heroImage: "https://cdn.jsdelivr.net/gh/bigboxthailand/arduino-assets@main/images/projects/lora-weather-station-with-arduino-56ada1_cover.jpg"
lang: "en"