กลับไปหน้ารวมไฟล์
mq3-alcohol-sensor-en.md

Breath Analysis: The MQ-3 Sensor

The MQ-3 Alcohol Sensor is a specialized tool designed specifically to detect alcohol vapors in the air or on a person's breath. It's a fascinating way to learn about chemical sensing and gas concentration.

ir_sensor_array_detail_1772704523332.png

Detection Principle

Similar to other sensors in the MQ series, the MQ-3 uses a sensitive heating element (SnO2). In clean air, its conductivity is low. When alcohol vapors are present, the sensor's resistance drops significantly.

  • Sensitivity: It can detect concentrations from 0.05 mg/L to 10 mg/L.
  • The Output: The Arduino reads the analog signal and can be programmed to trigger different colored LEDs based on the concentration (e.g., Green for Low, Yellow for Medium, Red for High).

Hardware Components

  • Arduino Uno/Nano: The processor.
  • MQ-3 Alcohol Sensor Module: The primary hardware.
  • LEDs (3 colors): To act as a visual bar graph.
  • Buzzer: To sound an alarm at high concentrations.

arduino_memory_game_piezo_macro_1772681197420.png

Education vs Reality

While this project is a great way to learn about calibration curves and analog thresholds, it is important to remember that it is for educational purposes and should never be used as a professional breathalyzer for safety-critical tasks.

ข้อมูล Frontmatter ดั้งเดิม 

title: "Alcohol Sensor Alarm (MQ-3)"
description: "Safety and science! Learn how to use the MQ-3 sensor with Arduino to detect alcohol vapors and visualize the concentration changes."
category: "Sensors & Environment"
difficulty: "Easy"