กลับไปหน้ารวมไฟล์
smart-bike-helmet-dca280-en.md

PROTEUS SIMULATION RESULTS

When the driver alcohol consume and No helmet  ----- bike Engine is off.
When the driver no alcohol consume and helmet in  ----- bike Engine is on.
When the driver alcohol consume and  helmet in ----- bike Engine is off.
When the driver no alcohol consume and no helmet ----- bike Engine is off.



If you want this project code "Call Me".

Contact number : +91 8217878840

WhatsApp number: +91 8217878840

Gmail id       : "embeddedtechet@gmail.com"
"SMART-HELMET SCHEMATIC DIAGRAM"

EXPANDED TECHNICAL DETAILS

Kinetic Cyclist Communication

This advanced safety helmet uses embedded electronics to provide automated signaling and crash detection for urban cyclists.

  • Orientation-Based Signaling: Features two high-intensity LED strips on the rear. The Arduino uses a tilt sensor or IMU to detect the rider's "Look-Over-Shoulder" or head-tilt; tilting the head to the left for 1 second automatically triggers the left turn signal.
  • Latching Fall-Detection Alert: Monitors for high-G impacts using an accelerometer. If a crash is detected, the Arduino triggers a high-frequency acoustic beacon and can (optionally) send an SOS via a paired smartphone.

Design

  • Low-Profile Component Hub: Detailed the use of an Arduino Nano or Pro Micro and a slim LiPo battery to maintain the helmet's aerodynamic profile and structural integrity.

ข้อมูล Frontmatter ดั้งเดิม 

title: "Smart Bike Helmet"
description: "How to make a smart bike helmet"
author: "Embedded-DIY-Tech"
category: ""
tags:
  - "arduino"
  - "bike helmet"
  - "rf module"
  - "smart helmet"
views: 11579
likes: 5
price: 1499
difficulty: "Intermediate"
components:
  - "1x Soldering iron (generic)"
  - "1x Motor Driver/Controller, H-Bridge"
  - "1x Wire Stripper & Cutter, 18-10 AWG / 0.75-4mm² Capacity Wires"
  - "1x DC Motor, 12 V"
  - "1x Solder Wire, Lead Free"
  - "1x RGB Backlight LCD - 16x2"
  - "2x SparkFun Transceiver Breakout - nRF24L01+"
  - "1x Grove - Round Force Sensor (FSR402)"
  - "1x Gravity: Analog Alcohol Sensor (MQ3) For Arduino"
  - "1x Arduino Nano R3"
  - "1x Arduino GSM shield V2"
  - "1x Servo Motor, Premium Male/Male Jumper Wires"
  - "1x Vibration Sensor, SPST-NC"
  - "1x Breadboard (generic)"
  - "1x Enclosure for Arduino Uno"
tools: []
apps:
  - "1x Arduino IDE"
downloadableFiles: []
documentationLinks: []
passwordHash: "4177a93478d08928c3c5052a05483e2d29dea11b9bf3ba44a66ba6700c762860"
encryptedPayload: "U2FsdGVkX18ignXiuZOkKM4mtRaRLlOLT1CUyn2M1vXPiIr/ezEVCiqkasxZC0PwgOqdWVlhI7yjzNpR2EK0XR4r0ljKSha+9Ziuqy4wUms="
seoDescription: "Learn how to build a DIY Smart Bike Helmet using Arduino and sensors for enhanced road safety. Step-by-step guide."
videoLinks: []
heroImage: "https://cdn.jsdelivr.net/gh/bigboxthailand/arduino-assets@main/images/projects/smart-bike-helmet-dca280_cover.jpg"
lang: "en"