กลับไปหน้ารวมไฟล์
tea5767-radio-en.md

Retro Waves: The TEA5767 FM Radio

Relive the classic era of radio with a modern twist. The TEA5767 FM Radio project allows you to build a fully functional digital tuner that can pick up local FM stations with crystal clarity.

button_led_basic_interaction_1772681969235.png

How It Works

The TEA5767 is a tiny, powerful silicon tuner. Instead of turning a physical dial to adjust a variable capacitor, the Arduino sends a frequency command via the I2C protocol.

  1. The Tune: You use buttons or a potentiometer to select a frequency (e.g., 98.5 MHz).
  2. The Command: The Arduino calculates the PLL (Phase-Locked Loop) data and sends it to the TEA5767.
  3. The Output: The module outputs a stereo audio signal, which you can plug into an amplifier or headphones.

Components List

  • Arduino Uno/Nano: The tuner's brain.
  • TEA5767 FM Radio Module: The receiver hardware.
  • PAM8403 Amplifier (Optional): If you want to drive speakers directly.
  • Potentiometer: For smooth volume and tuning control.
  • 3.5mm Audio Jack.

Enhancing the Setup

Most makers add a 16x2 LCD to show the current frequency and station signal strength. It's a great project for learning about radio frequency (RF) basics, antenna design, and the digital control of analog signals.

ข้อมูล Frontmatter ดั้งเดิม 

title: "TEA5767 FM Radio with Arduino"
description: "Tune in to the waves! Build your own digital FM radio receiver with an Arduino and the legendary TEA5767 module."
category: "Audio & Sound"
difficulty: "Intermediate"